Airbrush and Compressor Supplies


 Airbrush holders  CO2 regulator and gauge
 Respirators  Manifolds
 Dust mask  Fittings
 Air regulators, filters & gauges  Teflon tape
 Airbrush Lubricant  

For Createx compressor accessories & hoses, click here

Back to Main Accessories Page
Back to Compressor Page

Airbrush Holders
Holds two airbrushes of almost any make or model. Rotates and swivels for maximum flexibility and elimination of spills or accidents. Unit clamps securely to drafting tables, desks or taboret edges up to 2" thick.

 

Airbrush Holder w/ Regulator Bracket (Iwata)
94 AH250 Airbrush Holder w/ Regulator Bracket (Iwata)
Airbrush holder (Paasche)
99 A194 Airbrush holder (Paasche)
Respirator & Dust Mask
RESPIRATOR


99 99 Paint and Vapor Respirator
Paint & Vapor Respirator---This respirator is NIOSH approved to protect against most organic vapors and a minimum 95% efficient filtering of non-oil particulates. This typically includes Inks, Solvents, Lacquer and Enamel paints.


99 99-8 Replacement Filters for 99 Respirator
(16 Per Box)

99 99-9 Replacement Cartridge for 99 Respirator
(6 Per Box)



99 2DS N95-Softseal Disposable Respirator (20/Box)
This single use respirator should only be used with AEX, AE and SSO powders. Do not use with Paints. It is NIOSH approved to be a minimum 95% efficient in filtering out non-oil particulates.

99 AL-2 Keep your needles free of paint build-up by adding a non-oil lubricant to the exposed needle. Paasche's AL-2 Airbrush Lubricant is an oiless lube that is also great for the general maintanence of your airbrushes. 2.4 ounces,

Air Regulators, Filters &Gauges, etc.
For air compressors. Allows accurate regulation from the air source. Traps condensation and impurities. Not for use with CO2 tanks.
Standard 1/4" pipe thread fitting.

Air Regulator Gauge & Moisture Trap (Paasche)
Paasche Regulator Gauge & Moisture Trap


99 R75: Paasche Regulator Gauge & Moisture Trap
99 RA3000
Regulator with moisture trap and adapters for the Paasche D3000 compressor (made specifically for the D3000)
99 RA3000: Paasche R3000 Regulator & Moisture Trap
Moisture trap for hose (inline)
99 MT: moisture trap

MOISTURE FILTER (Iwata)
Moisture Filter

94 FA500 Moisture Filter
MOISTURE FILTER WITH REGULATOR & GUAGE (Iwata)
Moisture Filter

94 FA600 Moisture Filter, Regulator and Gauge
REGULATOR & GAUGE (Iwata)
Regulator and Gauge

94 FA700 Regulator and Gauge
New Pistol Grip Filter
Attaching directly onto the Iwata (only) airbrush, the Pistol Grip Filter is the final defense to deliver clean, dry air to your airbrush.

94 FA450: Pistol Grip Filter
Manifolds (Paasche, Iwata)
Paasche
Manifolds and Fittings
  
2 Brush Manifold w/Valves
99 HFM-2 1/4, 2 Brush Manifold w/Valves
3 Brush Manifold w/Valves
99 HFM-3 1/4, 3 Brush Manifold w/Valves
4 Brush Manifold w/Valves
99 HFM-4 1/4, 4 Brush Manifold w/Valves
6 Brush Manifold w/Valves (shown above)
99 HFM-6 1/4, 6 Brush Manifold w/Valves
8 Brush Manifold w/Valves
99 HFM-8 1/4, 8 Brush Manifold w/Valves
10 Brush Manifold w/Valves
99 HFM-10 1/4, 10 Brush Manifold w/Valves

1/4" t-fitting

99 HF-342, 1/4" t-fitting
1/4" male to male coupling

99 HF-33, 1/4" male to male coupling
1/4" valve assembly

99 HF-1/4, 1/4" valve assembly
Iwata Manifolds and Fittings  
On Off Valve

94 012003 On Off Valve
2 Way Valve Assembly

94 012004 2 Way Valve Assembly
3 way Valve Assembly

94 012005 3 way Valve Assembly
1/4" Male to Male Brass Fitting

94 012001 1/4" Male to Male Brass Fitting
1/4" Male to female Brass Fitting

94 012002 1/4" Male to female Brass Fitting
1/4" Female to Female Brass Fitting
94 012013 1/4" Female to Female Brass Fitting

e-mail us: click here