Wicked Colors

Multi-Surface Airbrush Paint

Fluorescent Colors – Neon colors. Not Lightfast! Very translucent. Best applied over a color-keyed base of Wicked Opaque or AutoBorne Sealer, for ex. Wicked W024 Fluorescent Yellow applied over 6004 Sealer Yellow. Highly transparent

• Generally spray well out-of-the-bottle through a 0.5mm and 0.35mm.
• Add 4011 Reducer sparingly if thinning as colors are low viscosity already
• Air pressure generally lower 20s to 35+ psi
• Fluorescent colors are NOT lightfast. Colors will eventually fade due to exposure to direct light. Not recommended for long-term or exterior applications(to extend Exterior exposure add 4050 UVLS Gloss see video below)
• Use 4004 Transparent Base to extend paint for increased transparency while maintaining a higher viscosity compared with thinning with excess amounts of 4011 Reducer.
• Thin with 4011 Reducer for use with smaller tip-sizes and lower psi settings
• Mix with 4030 Balancing Clear for improved adhesion & durability onto plastics and other hard surfaces.


• Refer to Wicked Colors Technical Data Sheet for more product information.


• Refer to  Hard-Surface Application Guide for additional product information.

View Createx How to Videos Createx Wicked Fluorescent Colors For additional instructional Videos: Createx Colors YouTube Channel

Wicked UV Glow Base

Wicked UV Glow Base is a transparent UV effect solution for applying over colors or mixing colors for enhanced effect under UV light. Best used as a UV-effect, transparent coating over bright, vivid colors such as Wicked Fluorescent Colors and white. Wicked Glow base only produces effect under UV / black-light. For colors that glow in the dark after being "charged" under direct light, use W212 Wicked Transparent Glow in the Dark.

Wicked Transparent Glow in the Dark Base

Wicked Transparent Glow in the Dark Base is for application over colors to create glow-in-the-dark effects. Allow colors to absorb direct light for 2 – 4 hours then use soon after in the dark for a soft glow, the hue being created by the color underlying Wicked Transparent Glow Dark.

Glow last approximately 30 minutes to 1 hour. Best applied over bright, vivid colors such as Wicked Fluorescent Colors and white.

• Best sprayed with airbrush tip-sizes 0.5mm and 0.35mm at 20 – 35+ psi
• May be reduced 5% - 20% per volume with 4011 Reducer.
• Use 4004 Transparent Base to extend paint for increased transparency while maintaining a higher viscosity compared with thinning with excess amounts of 4011 Reducer.
• Thin with 4011 Reducer for use with smaller tip-sizes and lower psi settings
• Mix with 4030 Balancing Clear for improved adhesion & durability onto plastics and other hard surfaces.


• Refer to Wicked Colors Technical Data Sheet for more product information.

View Createx How to Videos Createx Colors Glow Video

Airbrush Home • Order Information • Review Cart • E-Mail Us


Dixie Art Airbrush
Mail Order Address: PO Box 6433 • Metairie LA 70009-6433
Office Location: 525 Clay St • Kenner LA 70062-7062
1-800-783-2612 • artdixie@aol.com