Createx AutoBorne Sealers

Starting base for any Createx paint when painting hard surfaces. Apply direct to aluminum, plastic, wood, fiberglass and more. Cures to a hard coating over-which colors flow-out for a level finish.

Color-key colors with AutoBorne Sealer for improved coverage.

6000 Transparent Sealer is a clear primer-sealer. Use as inter-coat clear, flake carrier and adhesion promoter for most plastics including polycarbonate.

6013 Silver Sealer is the ground coat for Aluminum Colors and silvers.

• Thin with 4011 Reducer 5% - 10% per volume
• Airbrush: 0.5mm ~ 25 – 30 psi
• Spray-gun: 1.2 – 1.4mm ~ 18 – 24 psi


• Refer to  AutoBorne Tech Data Sheet for more information.


• Note: On Bear Metal:
  Use a 2k (catalyzed) epoxy or Urethane, direct-to-metal primer. Apply AutoBorne Sealer for automotive & edge-to-edge metal priming, specially in exterior conditions.