Wicked Colors

Multi-Surface Airbrush Paint

Aluminums – W355 Fine, W354 Medium and W356 Coarse are varying grades of actual aluminum-flakes. Apply over 6013 Silver Sealer for an even orientation.

• Best sprayed with airbrush tip-sizes 0.5mm or large and 0.3mm at 20 – 35+ psi
• May be reduced up to 10% per volume with 4011 Reducer
• For best results over plastic, wood, hard-surface & automotive, apply over 6013 Silver Sealer.
• Cover semi-opaque out of the bottle
• Use 4004 Transparent Base to extend paint for increased transparency while maintaining a higher viscosity compared with thinning with excess amounts of 4011 Reducer.
• Thin with 4011 Reducer for use with smaller tip-sizes and lower psi settings
• Mix with 4030 Balancing Clear for improved adhesion & durability onto plastics and other hard surfaces.


• Refer to Wicked Colors Technical Data Sheet for more product information.


• Refer to  Hard-Surface Application Guide for additional product information.

View Createx How to Videos Createx Wicked Metallic Colors For additional instructional Videos: Createx Colors YouTube Channel

Wicked Colors Products are made with lightfast pigments and an exterior-grade resin, Wicked Colors are a multi-surface, water-based airbrush paint suitable for any surface.

W357 Quicksilver –  is 6061-T6 Aluminum, a highly reflective, aircraft-grade aluminum.
Do not reduce.  Best applied over a gloss white or black base. For best chrome-like effect, apply over a W018 Gloss Black for a Chrome like finish. W357 same as 4104 Quciksilver.

W358 Gold Chrome – is 6061-T6 Aluminum, a highly reflective, aircraft-grade aluminum.
Do not reduce.  Best applied over a W018 Gloss Black for a deep, orangeshade gold or W017 Gloss White base for vivid, billet gold. W358 same as 4105 Gold Plating.

Spray with a 0.3mm tip or larger ~ 30 psi.
Allow a minimum of 6- hours air dry before top-coating with a gloss clear.

• Best sprayed with an airbrush tip-size of 0.3mm at 30 psi
• Use 4004 Transparent Base to extend paint for increased transparency while maintaining a higher viscosity compared with thinning with excess amounts of 4011 Reducer.
• Thin with 4011 Reducer for use with smaller tip-sizes and lower psi settings
• Mix with 4030 Balancing Clear for improved adhesion & durability onto plastics and other hard surfaces.
• Refer to Wicked Colors Technical Data Sheet for more info

View Createx How to Videos Createx Wicked Metallic Colors

View Createx How to Videos QuickSilver vs Gold Plating

Metallic mica colors, aluminum flake and pigmented mica that cover semi-opaque. Best applied over a white, black, or color-keyed Sealer Base.

• Best sprayed with airbrush tip-sizes 0.3mm or large and 0.3mm at 20 – 35+ psi
• May be reduced up to 10% per volume with 4011 Reducer
• Cover semi-opaque out of the bottle
• Use 4004 Transparent Base to extend paint for increased transparency while maintaining a higher viscosity compared with thinning with excess amounts of 4011 Reducer.
• Thin with 4011 Reducer for use with smaller tip-sizes and lower psi settings
• Mix with 4030 Balancing Clear for improved adhesion & durability onto plastics and other hard surfaces.


• Refer to Wicked Colors Technical Data Sheet for more product information.

View Createx How to Videos Createx Wicked Metallic Colors

Airbrush Home • Order Information • Review Cart • E-Mail Us


Dixie Art Airbrush
Mail Order Address: PO Box 6433 • Metairie LA 70009-6433
Office Location: 525 Clay St • Kenner LA 70062-7062
1-800-783-2612 • artdixie@aol.com